2021 China New Design Stainless Steel Min Thickness To Be Non-Magnetic - HeRui Factory Supply Good Quality Nickel Alloy Inconel 718 Kovar Invar 36 Bar Rods – Herui Detail:
- Place of Origin:
-
Jiangsu, China
- Type:
-
Nickel Bar
- Application:
-
Electromagnet pole head
- Grade:
-
FeCo50V2
- Ni (Min):
-
49% Co and 2% V
- Resistance (μΩ.m):
-
41mm2/m
- Powder Or Not:
-
Not Powder
- Ultimate Strength (≥ MPa):
-
1340
- Elongation (≥ %):
-
9
- Model Number:
-
fe cobalt vanadium alloy
- Brand Name:
-
HeRui
- Product name:
-
Nickel Alloy Inconel 718 Kovar Invar 36 Bar Rods
- Standard:
-
ASTM A801
- Surface:
-
Bright
- Delivery Time:
-
30 Days
- Shape:
-
Bar, Plate
- Size:
-
Customized
Forms of supply
|
||||
ROD
|
Dia.20 to180mm, Length2000mm,Max
|
Surface Finish: Black, De-scaling & Ground Surface
|
||
STRIP/SHEET
|
T0.1 to 3.0mm, width300mm,Max
|
Temper Name : Hard / Annealed
|
||
PLATE
|
T3.0 to 40.0mm, Width1000mm,Max
|
Surface Finish: Black / Bright
|
Chemical Composition,%
|
||||||||||||||||||
C Max
|
Mn Max
|
Si Max
|
P Max
|
S Max
|
Cr Max
|
Ni Max
|
Co
|
V
|
Fe
|
|||||||||
0.025
|
0.15
|
0.15
|
0.015
|
0.01
|
0.15
|
0.25
|
47.5-49.5
|
1.75-2.10
|
Bal.
|
DC Magnetic Properties
|
||||||||||
Forms
|
Magnetic induction at different magnetic field B,≥(T)
|
Coercivity Hc,≤(A/m)
|
||||||||
B800
|
B800
|
B800
|
B800
|
|||||||
Cold-Rolling Strip
|
2.00
|
2.00
|
2.00
|
2.00
|
128
|
|||||
Forgings ,Bar
|
1.50
|
1.50
|
1.50
|
1.50
|
144
|
Product detail pictures:
Related Product Guide:
Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" as well as the theory of "quality the basic, have confidence in the very first and management the advanced" for 2021 China New Design Stainless Steel Min Thickness To Be Non-Magnetic - HeRui Factory Supply Good Quality Nickel Alloy Inconel 718 Kovar Invar 36 Bar Rods – Herui, The product will supply to all over the world, such as: Angola, Mexico, Libya, We are very responsible for all details on our customers order no matter on warranty quality, satisfied prices, quick delivery, on time communication, satisfied packing, easy payment terms, best shipment terms, after sales service etc. We provide one-stop service and best reliability to our every customers. We work hard with our customers, colleagues, workers to make a better future.
The use and maintain of the sawblade
◎ The carbide tip of sawblade is very sharp, so process of using must be prevent the carbide tip.
◎ PeriodicaI cleaning and support the machine,the spindle’s running tolerance must be less than h7.
◎ The flanges must be parallel to each other,must be of the same diameter 1/3 of the sawblade’s diameter(formuIti—rip saw blade is 1/2.
◎ When instaIIion the sawbIade,it shaII be 5-6 teeth higher than board surface.
◎ Before operation,check the firmly of the sawblade,be sure nobody in front of the machine. Do not feed of operation check whether the machine is good for operaiton. Periodical check the function of the machine,the certicaI jump is less than ±0.02MM,and the flap is less than ±0.01.
◎ After continuous use,must be removed and cleaning the sawblade,get rid of the resin and sawdust of the sawblade of both sides.Other wise it would beinfluence the effect of using the sawblade.
◎ Deposit of the sawblade,must not be layer the sawblade,it is putted in the originaI package inside.
The renovate of the sawbIade
◎ The renovate of the carbide sawblade While it no longer sharpen and the horizontaI piece coarseaess. The power of using sawblade machine obviously Increase. When process materiaI,the materiaI appearred burst. The carbide tip exhaust more than 0.02MM.
◎ For the renovate the sawblade,it shouId be grinding by the a formal company, so be sure the quality of the sawblade after renovating.
By Ryan from kazakhstan - 2018.07.12 12:19
Managers are visionary, they have the idea of "mutual benefits, continuous improvement and innovation", we have a pleasant conversation and Cooperation.
By Joanna from Jamaica - 2018.09.23 18:44