Best-Selling Stainless Steel Capillary Tube - Soft Magnetic Alloy 1J85 – Herui Detail:
Description
1J85 is a kind of Fe-Ni soft magnetic alloy with high weak magnetic field permeability. It has high permeability and low coercivity in weak magnetic field. Widely used in radio electronics industry, precision instruments and meters, remote control and automatic control systems.
Chemical Composition
C | P | S | Cu | Mn | Si | Mo | Ni | Fe |
(≤) | ||||||||
0.03 | 0.020 | 0.020 | 0.20 | 0.30-0.60 | 0.15-0.30 | 4.8-5.2 | 79.0-81.0 | Bal. |
Mechanical Properties
Density (g/cm3) | Electrical Resistivity(μΩ•m) | Curie Point(℃) | Magnetic Properties (10-6 ) |
8.75 | 0.56 | 400 | 0.5 |
Form Available
bar, plate, strip
Product detail pictures:
Related Product Guide:
Our products and solutions are greatly recognized and trustworthy by customers and may fulfill constantly changing financial and social requires for Best-Selling Stainless Steel Capillary Tube - Soft Magnetic Alloy 1J85 – Herui, The product will supply to all over the world, such as: Romania, Luxembourg, Austria, As a way to make use of the resource on the expanding information and facts in international trade, we welcome prospects from everywhere on the web and offline. In spite in the top quality products and solutions we supply, effective and satisfying consultation service is supplied by our professional after-sale service group. Solution lists and thorough parameters and any other info weil be sent for you timely for the inquiries. So make sure you get in touch with us by sending us emails or contact us if you have any concerns about our firm. ou can also get our address info from our web site and come to our enterprise. or a field survey of our solutions. We're confident that we have been going to share mutual results and build solid co-operation relations with our companions in this market. We're looking forward to your inquiries.
The use and maintain of the sawblade
◎ The carbide tip of sawblade is very sharp, so process of using must be prevent the carbide tip.
◎ PeriodicaI cleaning and support the machine,the spindle’s running tolerance must be less than h7.
◎ The flanges must be parallel to each other,must be of the same diameter 1/3 of the sawblade’s diameter(formuIti—rip saw blade is 1/2.
◎ When instaIIion the sawbIade,it shaII be 5-6 teeth higher than board surface.
◎ Before operation,check the firmly of the sawblade,be sure nobody in front of the machine. Do not feed of operation check whether the machine is good for operaiton. Periodical check the function of the machine,the certicaI jump is less than ±0.02MM,and the flap is less than ±0.01.
◎ After continuous use,must be removed and cleaning the sawblade,get rid of the resin and sawdust of the sawblade of both sides.Other wise it would beinfluence the effect of using the sawblade.
◎ Deposit of the sawblade,must not be layer the sawblade,it is putted in the originaI package inside.
The renovate of the sawbIade
◎ The renovate of the carbide sawblade While it no longer sharpen and the horizontaI piece coarseaess. The power of using sawblade machine obviously Increase. When process materiaI,the materiaI appearred burst. The carbide tip exhaust more than 0.02MM.
◎ For the renovate the sawblade,it shouId be grinding by the a formal company, so be sure the quality of the sawblade after renovating.
By Eartha from Liberia - 2017.11.01 17:04
The enterprise has a strong capital and competitive power, product is sufficient, reliable, so we have no worries on cooperating with them.
By Louis from Finland - 2017.04.28 15:45