China Manufacturer for Capillary Tube Cutter - Electrical Resistance Wire / NiCr Wire – Herui Detail:
Standard
AWS 5.14 ERNiCrMo-4
Features
C-276 welding wire / ERNiCrMo-4 is mainly used for tungsten-inert gas welding (TIG) and melting gas welding with C276 alloy and other nickel-chrome-molybdenum alloy; it can also be used for surface welding of steel; this welding material has shown excellent corrosion resistance in a variety of corrosive media, especially resistant to pitting and crack corrosion.
ERNiCrMo-4 wire can be used for welding heterogeneous materials, including C276 with other nickel alloys, stainless steels and low-alloy steels.
Typical value of deposited metal composition (%)
| Type | Chemical composition of code | Chemical composition.% | ||||||||
| C | Mn | Fe | Si | Cu | Ni | Cr | Mo | W | ||
| SNi6276 | NiCr15Mo16Fe6W4 | ≤0.02 | ≤1.0 | 4.0-7.0 | ≤0.08 | ≤0.5 | ≥50.0 | 14.5-16.5 | 15.0-17.0 | 3.0-4.5 |
Product detail pictures:
Related Product Guide:
We have been proud from the higher consumer gratification and wide acceptance due to our persistent pursuit of high quality both on product or service and service for China Manufacturer for Capillary Tube Cutter - Electrical Resistance Wire / NiCr Wire – Herui, The product will supply to all over the world, such as: Rwanda, Croatia, Belgium, It is our customers' satisfaction over our products and services that always inspires us to do better in this business. We build mutually beneficial relationship with our clients by giving them large selection of premium car parts at marked down prices. We offer wholesale prices on all our quality parts so you are guaranteed greater savings.
The use and maintain of the sawblade
◎ The carbide tip of sawblade is very sharp, so process of using must be prevent the carbide tip.
◎ PeriodicaI cleaning and support the machine,the spindle’s running tolerance must be less than h7.
◎ The flanges must be parallel to each other,must be of the same diameter 1/3 of the sawblade’s diameter(formuIti—rip saw blade is 1/2.
◎ When instaIIion the sawbIade,it shaII be 5-6 teeth higher than board surface．
◎ Before operation,check the firmly of the sawblade,be sure nobody in front of the machine. Do not feed of operation check whether the machine is good for operaiton. Periodical check the function of the machine,the certicaI jump is less than ±0.02MM,and the flap is less than ±0.01.
◎ After continuous use,must be removed and cleaning the sawblade,get rid of the resin and sawdust of the sawblade of both sides.Other wise it would beinfluence the effect of using the sawblade.
◎ Deposit of the sawblade,must not be layer the sawblade,it is putted in the originaI package inside.
The renovate of the sawbIade
◎ The renovate of the carbide sawblade While it no longer sharpen and the horizontaI piece coarseaess. The power of using sawblade machine obviously Increase. When process materiaI,the materiaI appearred burst. The carbide tip exhaust more than 0.02MM.
◎ For the renovate the sawblade,it shouId be grinding by the a formal company, so be sure the quality of the sawblade after renovating.
By Elaine from Azerbaijan - 2017.08.15 12:36
In China, we have purchased many times, this time is the most successful and most satisfactory, a sincere and realiable Chinese manufacturer!
By Eden from Cancun - 2017.09.26 12:12
