Excellent quality M35 - Super Invar 32-5 – Herui

Short Description:


Product Detail

HOW TO USE THE SAWBLADE

Product Tags

Related Video

Feedback (2)

To continuously increase the administration process by virtue of the rule of "sincerely, good religion and excellent are the base of company development", we commonly absorb the essence of linked goods internationally, and continually build new solutions to fulfill the requires of shoppers for Capillary Cutter , High Speed Steel Material , 1.3343 Hss , For further inquires please do not hesitate to contact us. Thank you - Your support continuously inspires us.
Excellent quality M35 - Super Invar 32-5 – Herui Detail:

Description

Super Invar 32-5(UNS K93500), a magnetic, austenitic, solid solution alloy containing iron, nickel, and cobalt, is designed to provide minimum thermal expansion at room temperatures. This alloy also exhibits austenite stability to service temperature at least -67°F and thermal expansion properties less than those of Invar 36 alloy (36% nickel-iron) when used in the -67/203℉(-55/95°C) temperature range.

Applications for Super Invar 32-5 have included structural components for supports and substrates in optical and laser systems requiring precision measurements. This alloy has also used in wave guide tubes and other systems requiring metals in conjunction with low expansion glass/quartz assemblies.

Chemical composition

Iron

 Bal

Nominal Nickel

 32

Nominal Cobalt

 5.0

Carbon

 0.05

Silicon

 0.25

Sulfur

 0.015

Chromium

 0.25

Application

Optical instruments

Telescopes

Laser instruments and equipment

Ring laser gyroscopes

Laser benches

Positioning devices

Metrology devices

Scientific instruments

Structural components and supports for optical and laser systems

Applications that require lower expansivity than Invar

Equal grades

4J32(China)

Forms available

Strip, sheet, bar, wire, bar, forging, tube, capillary


Product detail pictures:

Excellent quality M35 - Super Invar 32-5 – Herui detail pictures


Related Product Guide:

Which has a positive and progressive attitude to customer's desire, our corporation constantly improves our merchandise quality to satisfy the desires of consumers and further focuses on safety, reliability, environmental demands, and innovation of Excellent quality M35 - Super Invar 32-5 – Herui, The product will supply to all over the world, such as: United Kingdom, Jakarta, Slovakia, We set "be a creditable practitioner to achieve the continuous development and innovation" as our motto. We would like to share our experience with friends at home and abroad, as a way to create a bigger cake with our joint efforts. We have several experienced R & D persons and we welcome OEM orders.
The use and maintain of the sawblade

◎ The carbide tip of sawblade is very sharp, so process of using must be prevent the carbide tip.

◎ PeriodicaI cleaning and support the machine,the spindle’s running tolerance must be less than h7.

◎ The flanges must be parallel to each other,must be of the same diameter 1/3 of the sawblade’s diameter(formuIti—rip saw blade is 1/2.

◎ When instaIIion the sawbIade,it shaII be 5-6 teeth higher than board surface.

◎ Before operation,check the firmly of the sawblade,be sure nobody in front of the machine. Do not feed of operation check whether the machine is good for operaiton. Periodical check the function of the machine,the certicaI jump is less than ±0.02MM,and the flap is less than ±0.01.

◎ After continuous use,must be removed and cleaning the sawblade,get rid of the resin and sawdust of the sawblade of both sides.Other wise it would beinfluence the effect of using the sawblade.

◎ Deposit of the sawblade,must not be layer the sawblade,it is putted in the originaI package inside.

The renovate of the sawbIade

◎ The renovate of the carbide sawblade While it no longer sharpen and the horizontaI piece coarseaess. The power of using sawblade machine obviously Increase. When process materiaI,the materiaI appearred burst. The carbide tip exhaust more than 0.02MM.

◎ For the renovate the sawblade,it shouId be grinding by the a formal company, so be sure the quality of the sawblade after renovating.

  • This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
    5 Stars By Gail from Uzbekistan - 2018.09.29 13:24
    The goods we received and the sample sales staff display to us have the same quality, it is really a creditable manufacturer.
    5 Stars By Hilary from Belgium - 2017.11.20 15:58