Factory Cheap Hot Hss Steel Rod - Factory sale nickel base alloy Inconel 718 Kovar N6 Invar 36 4J50 foil coil strip plate sheet tape – Herui Detail:
- Place of Origin:
-
Jiangsu, China
- Type:
-
Nickel Strip
- Application:
-
Vacuum Electronic Industry
- Grade:
-
nickel
- Ni (Min):
-
29%
- Resistance (μΩ.m):
-
49mm2/m
- Powder Or Not:
-
Not Powder
- Ultimate Strength (≥ MPa):
-
517
- Elongation (≥ %):
-
30
- Model Number:
-
Nickel Strip
- Brand Name:
-
HeRui
- Product name:
-
Inconel 718 Kovar N6 Invar 36 4J50 foil coil strip plate sheet tape
- Standard:
-
ASTM F-15
- Surface:
-
Bright
- Size:
-
Customized
- MOQ:
-
100KGS
- Color:
-
Nickel Nature
Composition
|
N4
|
N6
|
Nickel201
|
Nickel200
|
Ni
|
–
|
–
|
≥99
|
≥99.2
|
Ni+Co
|
99.9
|
99.5
|
–
|
–
|
Cu
|
≤0.015
|
0.1
|
≤0.25
|
≤0.25
|
Si
|
≤0.03
|
0.1
|
≤0.35
|
≤0.35
|
Mn
|
≤0.002
|
0.05
|
≤0.35
|
≤0.35
|
C
|
≤0.01
|
0.1
|
≤0.02
|
≤0.15
|
Mg
|
≤0.01
|
0.1
|
–
|
–
|
S
|
≤0.001
|
0.005
|
≤0.01
|
≤0.01
|
P
|
≤0.001
|
0.002
|
–
|
–
|
Fe
|
≤0.04
|
0.1
|
≤0.4
|
≤0.4
|
Product detail pictures:
Related Product Guide:
We also offer you product sourcing and flight consolidation expert services. We've our personal manufacturing unit and sourcing business. We can offer you virtually every variety of merchandise associated to our item range for Factory Cheap Hot Hss Steel Rod - Factory sale nickel base alloy Inconel 718 Kovar N6 Invar 36 4J50 foil coil strip plate sheet tape – Herui, The product will supply to all over the world, such as: Albania, Mauritius, Comoros, Ought to any of these products be of curiosity to you, remember to allow us to know. We are going to be satisfied to give you a quotation on receipt of one's in depth specs. We've our private experienced R&D enginners to meet any of one's requriements, We appear forward to receiving your enquires soon'and hope to have the opportunity to work together with you in the future. Welcome to check out our company.
The use and maintain of the sawblade
◎ The carbide tip of sawblade is very sharp, so process of using must be prevent the carbide tip.
◎ PeriodicaI cleaning and support the machine,the spindle’s running tolerance must be less than h7.
◎ The flanges must be parallel to each other,must be of the same diameter 1/3 of the sawblade’s diameter(formuIti—rip saw blade is 1/2.
◎ When instaIIion the sawbIade,it shaII be 5-6 teeth higher than board surface.
◎ Before operation,check the firmly of the sawblade,be sure nobody in front of the machine. Do not feed of operation check whether the machine is good for operaiton. Periodical check the function of the machine,the certicaI jump is less than ±0.02MM,and the flap is less than ±0.01.
◎ After continuous use,must be removed and cleaning the sawblade,get rid of the resin and sawdust of the sawblade of both sides.Other wise it would beinfluence the effect of using the sawblade.
◎ Deposit of the sawblade,must not be layer the sawblade,it is putted in the originaI package inside.
The renovate of the sawbIade
◎ The renovate of the carbide sawblade While it no longer sharpen and the horizontaI piece coarseaess. The power of using sawblade machine obviously Increase. When process materiaI,the materiaI appearred burst. The carbide tip exhaust more than 0.02MM.
◎ For the renovate the sawblade,it shouId be grinding by the a formal company, so be sure the quality of the sawblade after renovating.
By Andrew from Adelaide - 2018.06.18 17:25
We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!
By Christine from Zurich - 2018.02.04 14:13