Good Wholesale Vendors 303 Stainless Magnetic - NILO Alloy 42 / W. Nr.1.3917 / UNS K94100 – Herui

Short Description:


Product Detail

HOW TO USE THE SAWBLADE

Product Tags

Related Video

Feedback (2)

Sticking to the perception of "Creating products of top of the range and earning mates with people today from all over the world", we constantly put the desire of consumers in the first place for German Silver Wire , Monel Welding , Broken Capillary Tube , Normally to the majority of business users and traders to offer best quality goods and excellent company. Warmly welcome to join us, let's innovation collectively, to flying dream.
Good Wholesale Vendors 303 Stainless Magnetic - NILO Alloy 42 / W. Nr.1.3917 / UNS K94100 – Herui Detail:

Description

A nickel-iron controlled-expansion alloy containing 42% nickel. It has a low and nominally constant coefficient of thermal expansion from room temperature to about 570°F (300°C). Used for semiconductor lead frames in integrated circuits, bi-metal thermostat strip, thermostat rods, for ceramic-to-metal seals with alumina ceramics, and various glass-to-metal seals such as the core of copper-clad wire for sealing into glass envelopes of electric bulbs, radio valves, television tubes, and fluorescent lights.

FeNi42 (for example NILO alloy 42), has a nickel content of 42% and α ≈ 5.3 ppm/°C which matches that of silicon and therefore is widely used as lead frame material for electronic components, integrated circuits, etc.

Chemical Composition

C  0.05
P  0.020
S  0.020
Mn  0.80
Si  0.30
Al  0.10
Co  1.0
Ni  41.5~42.5
Fe  Balance

Average Coefficient of Linear Expansion ā/(10-6/K)

20~100℃ 5.6
20~200℃ 4.9
20~300℃ 4.8
20~400℃ 5.9
20~450℃  6.9
20~500℃ 7.8
20~600℃ 9.2

Applications

Alloy 42 has been used for the glass-to-metal seals in electronic tubes, automotive and industrial lamps, transformer and capacitor bushings and other glass-to-metal and ceramic-to-metal applications.

Forms

We can supply these products in all forms including wire, ribbon, strip, sheet and foil. You also can send your custom Dimensions and Tolerances by email or phone us.


Product detail pictures:

Good Wholesale Vendors 303 Stainless Magnetic - NILO Alloy 42 / W. Nr.1.3917 / UNS K94100 – Herui detail pictures


Related Product Guide:

Good quality comes initial; company is foremost; small business is cooperation" is our business philosophy which is frequently observed and pursued by our business for Good Wholesale Vendors 303 Stainless Magnetic - NILO Alloy 42 / W. Nr.1.3917 / UNS K94100 – Herui, The product will supply to all over the world, such as: Birmingham, Brisbane, Las Vegas, Our company sets up several departments, including production department, sales department, quality control department and sevice center,etc. only for accomplish the good-quality product to meet customer's demand, all of our products have been strictly inspected before shipment. We always think about the question on the side of the customers,because you win,we win!
The use and maintain of the sawblade

◎ The carbide tip of sawblade is very sharp, so process of using must be prevent the carbide tip.

◎ PeriodicaI cleaning and support the machine,the spindle’s running tolerance must be less than h7.

◎ The flanges must be parallel to each other,must be of the same diameter 1/3 of the sawblade’s diameter(formuIti—rip saw blade is 1/2.

◎ When instaIIion the sawbIade,it shaII be 5-6 teeth higher than board surface.

◎ Before operation,check the firmly of the sawblade,be sure nobody in front of the machine. Do not feed of operation check whether the machine is good for operaiton. Periodical check the function of the machine,the certicaI jump is less than ±0.02MM,and the flap is less than ±0.01.

◎ After continuous use,must be removed and cleaning the sawblade,get rid of the resin and sawdust of the sawblade of both sides.Other wise it would beinfluence the effect of using the sawblade.

◎ Deposit of the sawblade,must not be layer the sawblade,it is putted in the originaI package inside.

The renovate of the sawbIade

◎ The renovate of the carbide sawblade While it no longer sharpen and the horizontaI piece coarseaess. The power of using sawblade machine obviously Increase. When process materiaI,the materiaI appearred burst. The carbide tip exhaust more than 0.02MM.

◎ For the renovate the sawblade,it shouId be grinding by the a formal company, so be sure the quality of the sawblade after renovating.

  • The product classification is very detailed that can be very accurate to meet our demand, a professional wholesaler.
    5 Stars By Iris from Albania - 2018.07.12 12:19
    The goods are very perfect and the company sales manager is warmful, we will come to this company to purchase next time.
    5 Stars By Chris Fountas from Jordan - 2018.12.25 12:43