Hot Selling for Inconel 825 Filler Wire - Inconel 625 – Herui Detail:
Description
IINCONEL nickel-chromium alloy 625 (UNS N06625 / W. Nr. 2.4856 / GH3625 / NS336) is used for its high strength, excellent fabricability (including joining), and outstanding corrosion resistance. Service temperatures range from cryogenic to 1800°F (982°C).
Limiting Chemical Composition, %
Nickel | 58.0 min. |
Chromium | 20.0-23.0 |
Iron | 5.0 max. |
Molybdenum | 8.0-10.0 |
Niobium (plus Tantalum) | 3.15-4.15 |
Carbon | 0.10 max. |
Manganese | 0.50 max. |
Silicon | 0.50 max. |
Phosphorus | 0.015 max. |
Sulfur | 0.015 max. |
Aluminum | 0.40 max. |
Titanium | 0.40 max. |
Cobalt | 1.0 max. |
Application
Aircraft ducting systems
Aerospace
Jet engine exhaust systems
Engine thrust-reverser systems
Specialized seawater equipment
Chemical process equipment
Forms available
Plate, sheet, strip, wire, rod, bar, forging, pipe, tube, fitting, powder
Product detail pictures:
Related Product Guide:
Assume full responsibility to meet all demands of our clients; achieve continuous advancements by promoting the growth of our clients; become the final permanent cooperative partner of clients and maximize the interests of clients for Hot Selling for Inconel 825 Filler Wire - Inconel 625 – Herui, The product will supply to all over the world, such as: Korea, Grenada, Denmark, For more than ten years experience in this filed, our company has gained high reputation from home and abroad. So we welcome friends from all over the world to come and contact us, not only for business, but also for friendship.
The use and maintain of the sawblade
◎ The carbide tip of sawblade is very sharp, so process of using must be prevent the carbide tip.
◎ PeriodicaI cleaning and support the machine,the spindle’s running tolerance must be less than h7.
◎ The flanges must be parallel to each other,must be of the same diameter 1/3 of the sawblade’s diameter(formuIti—rip saw blade is 1/2.
◎ When instaIIion the sawbIade,it shaII be 5-6 teeth higher than board surface.
◎ Before operation,check the firmly of the sawblade,be sure nobody in front of the machine. Do not feed of operation check whether the machine is good for operaiton. Periodical check the function of the machine,the certicaI jump is less than ±0.02MM,and the flap is less than ±0.01.
◎ After continuous use,must be removed and cleaning the sawblade,get rid of the resin and sawdust of the sawblade of both sides.Other wise it would beinfluence the effect of using the sawblade.
◎ Deposit of the sawblade,must not be layer the sawblade,it is putted in the originaI package inside.
The renovate of the sawbIade
◎ The renovate of the carbide sawblade While it no longer sharpen and the horizontaI piece coarseaess. The power of using sawblade machine obviously Increase. When process materiaI,the materiaI appearred burst. The carbide tip exhaust more than 0.02MM.
◎ For the renovate the sawblade,it shouId be grinding by the a formal company, so be sure the quality of the sawblade after renovating.
By Modesty from Mexico - 2018.10.01 14:14
The company has a good reputation in this industry, and finally it tured out that choose them is a good choice.
By Octavia from Macedonia - 2017.05.21 12:31