Manufacturer for Nickel 200 Round Bar - HeRui Factory Supply Good Quality Nickel Alloy Inconel 718 Kovar Invar 36 Bar Rods – Herui Detail:
- Place of Origin:
-
Jiangsu, China
- Type:
- Application:
-
Electromagnet pole head
- Grade:
-
FeCo50V2
- Ni (Min):
-
49% Co and 2% V
- Resistance (μΩ.m):
-
41mm2/m
- Powder Or Not:
-
Not Powder
- Ultimate Strength (≥ MPa):
-
1340
- Elongation (≥ %):
-
9
- Model Number:
-
fe cobalt vanadium alloy
- Brand Name:
-
HeRui
- Product name:
-
Nickel Alloy Inconel 718 Kovar Invar 36 Bar Rods
- Standard:
-
ASTM A801
- Surface:
-
Bright
- Delivery Time:
-
30 Days
- Shape:
-
Bar, Plate
- Size:
-
Customized
Forms of supply
|
||||
ROD
|
Dia.20 to180mm, Length2000mm,Max
|
Surface Finish: Black, De-scaling & Ground Surface
|
||
STRIP/SHEET
|
T0.1 to 3.0mm, width300mm,Max
|
Temper Name : Hard / Annealed
|
||
PLATE
|
T3.0 to 40.0mm, Width1000mm,Max
|
Surface Finish: Black / Bright
|
Chemical Composition,%
|
||||||||||||||||||
C Max
|
Mn Max
|
Si Max
|
P Max
|
S Max
|
Cr Max
|
Ni Max
|
Co
|
V
|
Fe
|
|||||||||
0.025
|
0.15
|
0.15
|
0.015
|
0.01
|
0.15
|
0.25
|
47.5-49.5
|
1.75-2.10
|
Bal.
|
DC Magnetic Properties
|
||||||||||
Forms
|
Magnetic induction at different magnetic field B,≥(T)
|
Coercivity Hc,≤(A/m)
|
||||||||
B800
|
B800
|
B800
|
B800
|
|||||||
Cold-Rolling Strip
|
2.00
|
2.00
|
2.00
|
2.00
|
128
|
|||||
Forgings ,Bar
|
1.50
|
1.50
|
1.50
|
1.50
|
144
|
Product detail pictures:
Related Product Guide:
We thinks what clients think, the urgency of urgency to act from the interests of a purchaser position of principle, allowing for greater top quality, decrease processing costs, price ranges are much more reasonable, won the new and aged prospects the support and affirmation for Manufacturer for Nickel 200 Round Bar - HeRui Factory Supply Good Quality Nickel Alloy Inconel 718 Kovar Invar 36 Bar Rods – Herui, The product will supply to all over the world, such as: Czech republic, Birmingham, Bolivia, If any item be of interest to you, please let us know. We will try our best to satisfy your requirements with high quality products, the best prices and prompt delivery. Please feel free to contact us at any time. We will reply you when we receive your inquiries. Please note that samples are available before we start our business.
The use and maintain of the sawblade
◎ The carbide tip of sawblade is very sharp, so process of using must be prevent the carbide tip.
◎ PeriodicaI cleaning and support the machine,the spindle’s running tolerance must be less than h7.
◎ The flanges must be parallel to each other,must be of the same diameter 1/3 of the sawblade’s diameter(formuIti—rip saw blade is 1/2.
◎ When instaIIion the sawbIade,it shaII be 5-6 teeth higher than board surface.
◎ Before operation,check the firmly of the sawblade,be sure nobody in front of the machine. Do not feed of operation check whether the machine is good for operaiton. Periodical check the function of the machine,the certicaI jump is less than ±0.02MM,and the flap is less than ±0.01.
◎ After continuous use,must be removed and cleaning the sawblade,get rid of the resin and sawdust of the sawblade of both sides.Other wise it would beinfluence the effect of using the sawblade.
◎ Deposit of the sawblade,must not be layer the sawblade,it is putted in the originaI package inside.
The renovate of the sawbIade
◎ The renovate of the carbide sawblade While it no longer sharpen and the horizontaI piece coarseaess. The power of using sawblade machine obviously Increase. When process materiaI,the materiaI appearred burst. The carbide tip exhaust more than 0.02MM.
◎ For the renovate the sawblade,it shouId be grinding by the a formal company, so be sure the quality of the sawblade after renovating.
By May from Mauritius - 2017.10.23 10:29
This company has the idea of "better quality, lower processing costs, prices are more reasonable", so they have competitive product quality and price, that's the main reason we chose to cooperate.
By Lindsay from Victoria - 2017.12.02 14:11