No magnetic crossover Non Magncetic Steel
HOW TO USE THE SAWBLADE
- Place of Origin:
- Brand Name:
- Model Number:
Non Magncetic Steel
- Chemical Composition:
C Si Mn P S Cr Ni Mo Cu N
- Product name:
No magnetic crossove
Non magnetic steel
- Main Market:
Mn Cr Ni
C Si Mn P S Cr Ni Mo Cu N
API Spec 7-1
3 1/2″, 4 1/8″ , 4 3/4 “, 5″ ,6 1/2″, 6 3/4″, 7″ , 8″ 9″ etc
anti-collision ring.There should be at least two iron frames in each group of two or three for fixing.
We are based in Jiangsu, China, start from 2019,sell to Southern Europe(17.00%),Northern Europe(17.00%),Western Europe(17.00%),Southeast Asia(17.00%),Eastern Europe(17.00%),South Asia(15.00%). There are total about 11-50 people in our office.2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Non Magncetic Steel,High Speed Steel,Die Steel,Oil Drilling Tools,Hardware Tools
4. why should you buy from us not from other suppliers?
A new partner for High speed steel and Non magnetic steel Agile, innovative and quality-oriented company aiming at long-term partnershipLocated in Danyang, Jiangsu province, a dynamic area for special steelRelying on a network of qualified partners
5. what services can we provide?
Accepted Delivery Terms: FOB；
Accepted Payment Currency:USD,EUR;
Accepted Payment Type: T/T,L/C,D/P D/A,Credit Card,PayPal;
The use and maintain of the sawblade
◎ The carbide tip of sawblade is very sharp, so process of using must be prevent the carbide tip.
◎ PeriodicaI cleaning and support the machine,the spindle’s running tolerance must be less than h7.
◎ The flanges must be parallel to each other,must be of the same diameter 1/3 of the sawblade’s diameter(formuIti—rip saw blade is 1/2.
◎ When instaIIion the sawbIade,it shaII be 5-6 teeth higher than board surface．
◎ Before operation,check the firmly of the sawblade,be sure nobody in front of the machine. Do not feed of operation check whether the machine is good for operaiton. Periodical check the function of the machine,the certicaI jump is less than ±0.02MM,and the flap is less than ±0.01.
◎ After continuous use,must be removed and cleaning the sawblade,get rid of the resin and sawdust of the sawblade of both sides.Other wise it would beinfluence the effect of using the sawblade.
◎ Deposit of the sawblade,must not be layer the sawblade,it is putted in the originaI package inside.
The renovate of the sawbIade
◎ The renovate of the carbide sawblade While it no longer sharpen and the horizontaI piece coarseaess. The power of using sawblade machine obviously Increase. When process materiaI,the materiaI appearred burst. The carbide tip exhaust more than 0.02MM.
◎ For the renovate the sawblade,it shouId be grinding by the a formal company, so be sure the quality of the sawblade after renovating.