Personlized Products Inconel 925 - Techalloy 606 Welding AWS 5.14 MIG ERNiCr-3 Wire – Herui Detail:
Description
Commercially pure or low-alloy nickel has characteristics that are useful in several fields, notably chemical processing and electronics. Pure Nickel is highly resistant to various reducing chemicals and is unexcelled in resistance to caustic alkalis. Compared with nickel alloys, commercially pure nickel has high electrical and thermal conductivity. It also has a high Curie temperature and good magnetostrictive properties. Annealed nickel has a low hardness and good ductility and malleability. Those attributes, combined with good weldability, make the metal highly fabricable. Pure Nickel has a relatively low work-hardening rate, but it can be cold worked to moderately high strength levels while maintaining ductility.
Common Names
Oxford Alloy 82 FM82 Techalloy 606
Standard
AWS 5.14 Class ERNiCr-3 / ASME SFA 5.14 Class ERNiCr-3 UNS N06082 Werkstoff Nr. 2.4806 ISO SNi6082
Specification
| ERNiCr-3 | Chemical composition.% | |||||||||
| C | Mn | Fe | Si | Cu | Ni | Ti | Cr | Nb | ||
| SNi6082 | NiCr20Mn3Nb | ≤0.1 | 2.5-3.5 | ≤3.0 | ≤0.5 | ≤0.5 | ≥67.0 | ≤0.7 | 18.0-22.0 | 2.0-3.0 |
AWS ERNiCr-3, EN/RN82
Applications
Welding of alloys 600, 601 and alloy 800 to themselves and dissimilar welding of stainless to carbon
Product detail pictures:
Related Product Guide:
We also offer product sourcing and flight consolidation services. We have our own factory and sourcing office. We can provide you with almost every type of product related to our product range for Personlized Products Inconel 925 - Techalloy 606 Welding AWS 5.14 MIG ERNiCr-3 Wire – Herui, The product will supply to all over the world, such as: Albania, Mauritius, Finland, We have been making our products for more than 20 years . Mainly do wholesale , so we have the most competitive price , but highest quality. For the past years , we got very good feedbacks , not only because we provide good products , but also because of our good after-sale service . We are here waiting for you for your inquiry.
The use and maintain of the sawblade
◎ The carbide tip of sawblade is very sharp, so process of using must be prevent the carbide tip.
◎ PeriodicaI cleaning and support the machine,the spindle’s running tolerance must be less than h7.
◎ The flanges must be parallel to each other,must be of the same diameter 1/3 of the sawblade’s diameter(formuIti—rip saw blade is 1/2.
◎ When instaIIion the sawbIade,it shaII be 5-6 teeth higher than board surface．
◎ Before operation,check the firmly of the sawblade,be sure nobody in front of the machine. Do not feed of operation check whether the machine is good for operaiton. Periodical check the function of the machine,the certicaI jump is less than ±0.02MM,and the flap is less than ±0.01.
◎ After continuous use,must be removed and cleaning the sawblade,get rid of the resin and sawdust of the sawblade of both sides.Other wise it would beinfluence the effect of using the sawblade.
◎ Deposit of the sawblade,must not be layer the sawblade,it is putted in the originaI package inside.
The renovate of the sawbIade
◎ The renovate of the carbide sawblade While it no longer sharpen and the horizontaI piece coarseaess. The power of using sawblade machine obviously Increase. When process materiaI,the materiaI appearred burst. The carbide tip exhaust more than 0.02MM.
◎ For the renovate the sawblade,it shouId be grinding by the a formal company, so be sure the quality of the sawblade after renovating.
By Elsie from Macedonia - 2018.09.21 11:01
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Marcia from Ghana - 2017.10.23 10:29
