PriceList for Inconel 800ht - Super Quality Hot Selling Kovar N6 GH4080A Invar 36 4J50 Round Rod Nickel Bar – Herui Detail:
- Place of Origin:
-
Jiangsu, China
- Type:
-
Nickel Bar
- Application:
-
Electromagnet pole head
- Grade:
-
Nickel
- Ni (Min):
-
49% Co and 2% V
- Resistance (μΩ.m):
-
41mm2/m
- Powder Or Not:
-
Not Powder
- Ultimate Strength (≥ MPa):
-
1340
- Elongation (≥ %):
-
42
- Model Number:
-
Nickel Bar
- Brand Name:
-
HeRui
- Product name:
-
Kovar N6 GH4080A Invar 36 4J50 Round Rod Nickel Bar
- Standard:
-
ASTM A801
- Surface:
-
Bright
- Delivery Time:
-
30 Days
- Shape:
-
Bar, Plate
- Size:
-
Customized
Forms of supply
|
||||
ROD
|
Dia.20 to180mm, Length2000mm,Max
|
Surface Finish: Black, De-scaling & Ground Surface
|
||
STRIP/SHEET
|
T0.1 to 3.0mm, width300mm,Max
|
Temper Name : Hard / Annealed
|
||
PLATE
|
T3.0 to 40.0mm, Width1000mm,Max
|
Surface Finish: Black / Bright
|
Chemical Composition,%
|
||||||||||||||||||
C Max
|
Mn Max
|
Si Max
|
P Max
|
S Max
|
Cr Max
|
Ni Max
|
Co
|
V
|
Fe
|
|||||||||
0.025
|
0.15
|
0.15
|
0.015
|
0.01
|
0.15
|
0.25
|
47.5-49.5
|
1.75-2.10
|
Bal.
|
DC Magnetic Properties
|
||||||||||
Forms
|
Magnetic induction at different magnetic field B,≥(T)
|
Coercivity Hc,≤(A/m)
|
||||||||
B800
|
B800
|
B800
|
B800
|
|||||||
Cold-Rolling Strip
|
2.00
|
2.00
|
2.00
|
2.00
|
128
|
|||||
Forgings ,Bar
|
1.50
|
1.50
|
1.50
|
1.50
|
144
|
Product detail pictures:
Related Product Guide:
Being supported by an highly developed and skilled IT group, we could offer you technical support on pre-sales & after-sales support for PriceList for Inconel 800ht - Super Quality Hot Selling Kovar N6 GH4080A Invar 36 4J50 Round Rod Nickel Bar – Herui, The product will supply to all over the world, such as: Pakistan, Pretoria, Nepal, With a wide range, good quality, reasonable prices and stylish designs, our items are extensively used in this field and other industries. We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success! We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.
The use and maintain of the sawblade
◎ The carbide tip of sawblade is very sharp, so process of using must be prevent the carbide tip.
◎ PeriodicaI cleaning and support the machine,the spindle’s running tolerance must be less than h7.
◎ The flanges must be parallel to each other,must be of the same diameter 1/3 of the sawblade’s diameter(formuIti—rip saw blade is 1/2.
◎ When instaIIion the sawbIade,it shaII be 5-6 teeth higher than board surface.
◎ Before operation,check the firmly of the sawblade,be sure nobody in front of the machine. Do not feed of operation check whether the machine is good for operaiton. Periodical check the function of the machine,the certicaI jump is less than ±0.02MM,and the flap is less than ±0.01.
◎ After continuous use,must be removed and cleaning the sawblade,get rid of the resin and sawdust of the sawblade of both sides.Other wise it would beinfluence the effect of using the sawblade.
◎ Deposit of the sawblade,must not be layer the sawblade,it is putted in the originaI package inside.
The renovate of the sawbIade
◎ The renovate of the carbide sawblade While it no longer sharpen and the horizontaI piece coarseaess. The power of using sawblade machine obviously Increase. When process materiaI,the materiaI appearred burst. The carbide tip exhaust more than 0.02MM.
◎ For the renovate the sawblade,it shouId be grinding by the a formal company, so be sure the quality of the sawblade after renovating.
By Gladys from Russia - 2018.09.12 17:18
Hope that the company could stick to the enterprise spirit of "Quality, Efficiency, Innovation and Integrity", it will be better and better in the future.
By Gustave from United States - 2018.12.22 12:52