Wholesale Price China Austenitic Stainless Steel Non Magnetic - Inconel 718 – Herui Detail:
Description
Inconel 718 (UNS N07718 / W. Nr. 2.4668 / GH4169 / NiCr19Fe19Nb5) is a high-strength, corrosion-resistant nickel chromium material used at -423° to 1300°F. The age-hardenable alloy can be readily fabricated, even into complex parts. Its welding characteristics, especially its resistance to post-welding cracks, are outstanding. The ease and economy with which INCONEL alloy 718 can be fabricated, combined with good tensile, fatigue, creep, and rupture strength, have resulted in its use in a wide range of applications. Examples of these are components for liquid fueled rockets, rings, casings and various formed sheet metal parts for aircraft and land-based gas turbine engines, and cryogenic tankage. It is also used for fasteners and instrumentation parts.
Typical chemical composition
| Nickel (plus Cobalt) | 50.00-55.00 |
| Chromium | 17.00-21.00 |
| Iron | Balance |
| Niobium (plus Tantalum) | 4.75-5.50 |
| Molybdenum | 2.80-3.30 |
| Titanium | 0.65-1.15 |
| Aluminum | 0.20-0.80 |
| Cobalt | 1.00 max. |
| Carbon | 0.08 max. |
| Manganese | 0.35 max. |
| Silicon | 0.35 max. |
| Phosphorus | 0.015 max. |
| Sulfur | 0.015 max. |
| Boron | 0.006 max. |
| Copper | 0.30 max. |
Application
Chemical processing
Aerospace
Liquid fuel rocket motor components
Pollution-control equipment
Nuclear reactors
Cryogenic storage tanks
Valves, fasteners, springs, mandrels, tubing hangers
Well head completion equipment and blow out preventers (BOP’s)
Gas turbine engine parts
Equal Grade
Alloy 718, Haynes 718, Nicrofer 5219, Allvac 718, Altemp 718, GH4169, UNS N07718
Product detail pictures:
Related Product Guide:
We insist about the theory of growth of 'High excellent, Performance, Sincerity and Down-to-earth working approach' to offer you with great company of processing for Wholesale Price China Austenitic Stainless Steel Non Magnetic - Inconel 718 – Herui, The product will supply to all over the world, such as: Miami, Sierra Leone, Toronto, Our monthly output is more than 5000pcs. We have set up a strict quality control system. Please feel free to contact us for further information. We hope that we can establish long-term business relationships with you and carry out business on a mutually beneficial basis. We are and will be always trying our best to serve you.
The use and maintain of the sawblade
◎ The carbide tip of sawblade is very sharp, so process of using must be prevent the carbide tip.
◎ PeriodicaI cleaning and support the machine,the spindle’s running tolerance must be less than h7.
◎ The flanges must be parallel to each other,must be of the same diameter 1/3 of the sawblade’s diameter(formuIti—rip saw blade is 1/2.
◎ When instaIIion the sawbIade,it shaII be 5-6 teeth higher than board surface．
◎ Before operation,check the firmly of the sawblade,be sure nobody in front of the machine. Do not feed of operation check whether the machine is good for operaiton. Periodical check the function of the machine,the certicaI jump is less than ±0.02MM,and the flap is less than ±0.01.
◎ After continuous use,must be removed and cleaning the sawblade,get rid of the resin and sawdust of the sawblade of both sides.Other wise it would beinfluence the effect of using the sawblade.
◎ Deposit of the sawblade,must not be layer the sawblade,it is putted in the originaI package inside.
The renovate of the sawbIade
◎ The renovate of the carbide sawblade While it no longer sharpen and the horizontaI piece coarseaess. The power of using sawblade machine obviously Increase. When process materiaI,the materiaI appearred burst. The carbide tip exhaust more than 0.02MM.
◎ For the renovate the sawblade,it shouId be grinding by the a formal company, so be sure the quality of the sawblade after renovating.
By Lorraine from Cape Town - 2017.08.18 11:04
This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
By Christopher Mabey from Mongolia - 2017.01.28 18:53
