Wholesale Price M2 High Speed Steel - Professional Supplier for Top Quality High Speed Steel M2, M35, W4, W9 – Herui Detail:
- Place of Origin:
-
Jiangsu, China
- Brand Name:
-
HeRui
- Model Number:
-
HR-HSS
- Application:
-
For Cutting Tools
- Shape:
-
Plate, Bar, sheet, wire, etc.
- Material:
-
W,Mo,Cr,V
- Chemical Composition:
-
Customized
- Standard:
-
ASTM, DIN, JIS,
- Appearance:
-
Bright
- Delivery time:
-
30 Days
- Size:
-
Customized
- MOQ:
-
100kgs
High-speed steels exhibit high strength and hardness, but typically exhibit lower toughness than the cold work tool steels. Some, most notably M2 and powder metal M4, are used in cold work applications because of the strength and wear resistance which can be achieved.
To qualify as a high-speed steel, the chemical composition must meet certain minimum requirements, which are defined in the ASTM A600 Specification for High-Speed Tool Steels. The lowest alloy grades, M50 and M52 high-speed steels, are properly known as intermediate high-speed steels because of their lower alloy contents. The cobalt-bearing grades, such as M35 and M42, are known as super high-speed steels because they exhibit enhanced hot hardness.
The nominal chemical compositions of the common high-speed and intermediate high-speed tool steels are presented in weight percent below. Relative comparisons of the properties of the steels are presented in the chart on the reverse side. More specific information about the steels may be obtained from the individual data sheets.
|
Grade No. |
C |
Si |
Mn |
W |
Mo |
Cr |
V |
|
M2 |
0.80-0.90 |
0.20-0.40 |
0.15-0.40 |
5.50-6.75 |
4.50-5.50 |
3.80-4.40 |
1.75-2.20 |
|
Grade No. |
C |
Si |
Mn |
Cr |
Mo |
V |
W |
Co |
|
M35 |
0.80-0.90 |
0.20-0.45 |
0.15-0.40 |
3.75-4.50 |
4.50-5.50 |
1.75-2.25 |
5.50-6.50 |
4.40-5.50 |
|
Grade No. |
C |
Si |
Mn |
Cr |
Mo |
V |
W |
|
W4 |
0.88-0.98 |
0.20-0.40 |
0.20-0.40 |
3.80-4.40 |
2.50-3.50 |
1.20-1.80 |
3.50-4.50 |
|
Grade No. |
C |
Si |
Mn |
Cr |
Mo |
V |
W |
|
W9 |
0.77-0.87 |
0.20-0.40 |
0.20-0.40 |
3.80-4.40 |
2.70-3.30 |
1.30-1.70 |
8.50-9.50 |
ZHENJIANG HERUI BUSINESS BRIDGE IMP&EXP Co., Ltd.
A new partner for High speed steel and Non magnetic steel
Agile, innovative and quality-oriented company aiming at long-term partnership
Located in Danyang, Jiangsu province, a dynamic area for special steel
Relying on a network of qualified partners all specialized in special steel
Offering a short lead-time service
Two shareholders have a strong background in special steelmore than 25 years experience.
Main Prodcuts:
1/ High speed steel
grade : M2 ,M35, W4 ,W9
Drawn bar Ø2-16mm
Ground barØ 5-15mm
Peeled or turned round bar Ø 15-150mm.
2/ Non magnetic steel
grade :Meet the P550 P530 standard
Steel
Non magnetic drill collar (or Flex), Crossover
Inch size 3 1/2”, 4 1/8” , 4 3/4 “, 5” ,6 1/2”, 6 3/4”, 7” , 8”9” etc.
Product detail pictures:
Related Product Guide:
Our personnel are always in the spirit of "continuous improvement and excellence", and with the superior quality products, favorable price and good after-sales services, we try to win every customer's trust for Wholesale Price M2 High Speed Steel - Professional Supplier for Top Quality High Speed Steel M2, M35, W4, W9 – Herui, The product will supply to all over the world, such as: Czech Republic, France, Georgia, We are introduced as a one of the growing manufacture supplier and export of our products. We have a team of dedicated trained professional who take care the quality and timely supply. If you are looking for Good Quality at a good price and timely delivery. Do contact us.
The use and maintain of the sawblade
◎ The carbide tip of sawblade is very sharp, so process of using must be prevent the carbide tip.
◎ PeriodicaI cleaning and support the machine,the spindle’s running tolerance must be less than h7.
◎ The flanges must be parallel to each other,must be of the same diameter 1/3 of the sawblade’s diameter(formuIti—rip saw blade is 1/2.
◎ When instaIIion the sawbIade,it shaII be 5-6 teeth higher than board surface．
◎ Before operation,check the firmly of the sawblade,be sure nobody in front of the machine. Do not feed of operation check whether the machine is good for operaiton. Periodical check the function of the machine,the certicaI jump is less than ±0.02MM,and the flap is less than ±0.01.
◎ After continuous use,must be removed and cleaning the sawblade,get rid of the resin and sawdust of the sawblade of both sides.Other wise it would beinfluence the effect of using the sawblade.
◎ Deposit of the sawblade,must not be layer the sawblade,it is putted in the originaI package inside.
The renovate of the sawbIade
◎ The renovate of the carbide sawblade While it no longer sharpen and the horizontaI piece coarseaess. The power of using sawblade machine obviously Increase. When process materiaI,the materiaI appearred burst. The carbide tip exhaust more than 0.02MM.
◎ For the renovate the sawblade,it shouId be grinding by the a formal company, so be sure the quality of the sawblade after renovating.
By Mignon from Lisbon - 2018.02.21 12:14
This company has the idea of "better quality, lower processing costs, prices are more reasonable", so they have competitive product quality and price, that's the main reason we chose to cooperate.
By Lillian from Sevilla - 2017.07.07 13:00
