Bottom price Alloy 718 Round Bar - HeRui Factory Supply Good Quality Nickel Alloy Inconel 718 Kovar Invar 36 Bar Rods – Herui Detail:
- Place of Origin:
-
Jiangsu, China
- Type:
-
Nickel Bar
- Application:
-
Electromagnet pole head
- Grade:
-
FeCo50V2
- Ni (Min):
-
49% Co and 2% V
- Resistance (μΩ.m):
-
41mm2/m
- Powder Or Not:
-
Not Powder
- Ultimate Strength (≥ MPa):
-
1340
- Elongation (≥ %):
-
9
- Model Number:
-
fe cobalt vanadium alloy
- Brand Name:
-
HeRui
- Product name:
-
Nickel Alloy Inconel 718 Kovar Invar 36 Bar Rods
- Standard:
-
ASTM A801
- Surface:
-
Bright
- Delivery Time:
-
30 Days
- Shape:
-
Bar, Plate
- Size:
-
Customized
Forms of supply
|
||||
ROD
|
Dia.20 to180mm, Length2000mm,Max
|
Surface Finish: Black, De-scaling & Ground Surface
|
||
STRIP/SHEET
|
T0.1 to 3.0mm, width300mm,Max
|
Temper Name : Hard / Annealed
|
||
PLATE
|
T3.0 to 40.0mm, Width1000mm,Max
|
Surface Finish: Black / Bright
|
Chemical Composition,%
|
||||||||||||||||||
C Max
|
Mn Max
|
Si Max
|
P Max
|
S Max
|
Cr Max
|
Ni Max
|
Co
|
V
|
Fe
|
|||||||||
0.025
|
0.15
|
0.15
|
0.015
|
0.01
|
0.15
|
0.25
|
47.5-49.5
|
1.75-2.10
|
Bal.
|
DC Magnetic Properties
|
||||||||||
Forms
|
Magnetic induction at different magnetic field B,≥(T)
|
Coercivity Hc,≤(A/m)
|
||||||||
B800
|
B800
|
B800
|
B800
|
|||||||
Cold-Rolling Strip
|
2.00
|
2.00
|
2.00
|
2.00
|
128
|
|||||
Forgings ,Bar
|
1.50
|
1.50
|
1.50
|
1.50
|
144
|
Product detail pictures:
Related Product Guide:
Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs of Bottom price Alloy 718 Round Bar - HeRui Factory Supply Good Quality Nickel Alloy Inconel 718 Kovar Invar 36 Bar Rods – Herui, The product will supply to all over the world, such as: Vietnam, Benin, Serbia, Due to the stability of our items, timely supply and our sincere service, we are able to sell our merchandise not only over the domestic market, but also exported to countries and regions, including the Middle East, Asia, Europe and other countries and regions. At the same time, we also undertake OEM and ODM orders. We will do our best to serve your company, and establish a successful and friendly cooperation with you.
The use and maintain of the sawblade
◎ The carbide tip of sawblade is very sharp, so process of using must be prevent the carbide tip.
◎ PeriodicaI cleaning and support the machine,the spindle’s running tolerance must be less than h7.
◎ The flanges must be parallel to each other,must be of the same diameter 1/3 of the sawblade’s diameter(formuIti—rip saw blade is 1/2.
◎ When instaIIion the sawbIade,it shaII be 5-6 teeth higher than board surface.
◎ Before operation,check the firmly of the sawblade,be sure nobody in front of the machine. Do not feed of operation check whether the machine is good for operaiton. Periodical check the function of the machine,the certicaI jump is less than ±0.02MM,and the flap is less than ±0.01.
◎ After continuous use,must be removed and cleaning the sawblade,get rid of the resin and sawdust of the sawblade of both sides.Other wise it would beinfluence the effect of using the sawblade.
◎ Deposit of the sawblade,must not be layer the sawblade,it is putted in the originaI package inside.
The renovate of the sawbIade
◎ The renovate of the carbide sawblade While it no longer sharpen and the horizontaI piece coarseaess. The power of using sawblade machine obviously Increase. When process materiaI,the materiaI appearred burst. The carbide tip exhaust more than 0.02MM.
◎ For the renovate the sawblade,it shouId be grinding by the a formal company, so be sure the quality of the sawblade after renovating.
By Eunice from Oman - 2017.06.29 18:55
The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.
By Caroline from Bandung - 2018.08.12 12:27