Products

  • High speed steel M35 flat steel

    High speed steel M35 flat steel

    Video Special product specifications. The thickness is 8-50mm, width 150-625mm, length 5-15m, and the product specifications are closely spaced to meet the needs of the user, instead of using the medium plate, without cutting, it can be directly welded. The surface of the product is bright and clean. The process of high pressure water descaling is used twice to ensure that the surface of the steel is clean. The two sides are vertical and the corners are clear. The second pass of vertical rol...
  • High speed steel M35 Pan Round

    High speed steel M35 Pan Round

    Video Pan round, also known as pan bar, is the name commonly used in building construction, indicating that the diameter of the steel bar is less than 10mm, because the steel bar below 10mm is easy to bend, in order to reduce the length before transportation, it is rolled into a very long circle in the manufacturer, in the construction site, such a steel bar is referred to as pan round. The surface of the disc is iron oxide, also known as decarburised layer, the colour is dark green, the hea...
  • High speed steel M2 round bar

    High speed steel M2 round bar

    Video M2 round bar is a representative steel grade of tungsten-molybdenum general-purpose high-speed steel, toughness, wear resistance is better than W18Cr4V, hardness, red hardness and high temperature hardness is comparable. It can be used for the manufacture of various tools with high impact forces, large general tools and thermoplastic forming tools, as well as for wear parts under high loads and cold work moulds. M2 is a molybdenum-based high-speed steel with the advantages of low carbi...
  • High speed steel M35 round bar

    High speed steel M35 round bar

    Video M35 is equivalent to the domestic mould steel: W6Mo5Cr4V2Co5 Standard: GB/T 9943-1988, through appropriate heat treatment, can get high hardness (HRC67 ~ 70), high red hardness (625 ℃ 4 hours, HRC63 ~ 65) and high wear resistance, suitable for the manufacture of strong cutting with wear resistance, impact resistance of various tools, advanced punching die, screw die, more need toughness and The product is suitable for the manufacture of tools with high abrasion and impact resistance fo...
  • High speed steel M2 Pan Round

    High speed steel M2 Pan Round

    Video Mild steel hot rolled round bars are formed bars with a round cross section and smooth surface, which are hot rolled and naturally cooled. The nominal diameter of the bars is 5.5 to 14.0 mm. M2 coil is a representative steel grade of tungsten-molybdenum general-purpose high-speed steel, with better toughness and wear resistance than W18Cr4V, and comparable hardness, red-hardness and high-temperature hardness. It can be used for the manufacture of various tools with high impact forces, ...
  • High speed steel M2 flat steel

    High speed steel M2 flat steel

    Video Flat steel is rolled with negative deviation, but delivered by actual weight, which increases the utilisation rate by 1 to 5 percentage points compared to steel plates. Flat steel can be produced in fixed thickness, width and length according to user requirements, which reduces cutting for users and saves processes, reduces the consumption of labour and materials, and also reduces the processing loss of raw materials, saving time, effort and material. The products have been professiona...
  • High speed steel Pan Round

    High speed steel Pan Round

    Video Coils, also known as wire rod, usually refer to small diameter round steel in coils. The diameter of a coil is in the range of 5-19 mm (usually 6-9 mm) and its lower value is the minimum size of a hot rolled steel section. High Speed Steel (HSS) is a tool steel with high hardness, wear resistance and heat resistance, also known as high speed tool steel or sharp steel, commonly known as white steel. HSS was created by F.W. Taylor and M. White in the USA in 1898. The process performance ...
  • High speed steel flat steel

    High speed steel flat steel

    Video Precise product scale, three-point difference, the same level difference are better than the steel plate standard; the product is straight and the plate shape is good.we adopt continuous rolling process for the finishing rolling , automatic looper automatic control, to ensure that no steel is piled or stretched, and the product size is high. The tolerance range, three-point difference, same stripe, sickle bend and other parameters are all better than the medium plate, and the plate sha...
  • High speed steel round bar

    High speed steel round bar

    Video High Speed Steel (HSS) is a tool steel with high hardness, wear resistance and heat resistance, also known as high speed tool steel or sharp steel, commonly known as white steel. HSS was created by F.W. Taylor and M. White in the USA in 1898. The process performance of high-speed steel is good, strength and toughness with good, so mainly used to manufacture complex thin-edged and impact-resistant metal cutting tools, but also to manufacture high-temperature bearings and cold extrusion ...
  • Non-magnetic plate

    Non-magnetic plate

    Non-magnetic plate is a kind of high-strength austenitic non-magnetic die steel, which can maintain stable austenite in various states, they have very low permeability, high-temperature strength,hardness, and high wear resistance. But its mechanical processing performance is poor, so they need high temperature annealing to change the particle size and distribution of carbides. The use of gas nitrocarburizing heat treatment can further improve the surface hardness and wear resistance, thereby ...
  • Non-magnetic flat bar

    Non-magnetic flat bar

     Non-magnetic flat steel is one of non-magnetic steel, which actually refers to steel that is not ferromagnetic and cannot be magnetized. Non-magnetic steel belongs to Fe-Mn-Al-C series austenite. The chemical composition determines the electromagnetic properties, the structure is stable, the mechanical properties are excellent, the magnetic permeability is low and the resistivity is high, and the eddy current loss in the magnetic field is extremely small. When the magnetic field intensity is...
  • Non-magnetic protection pipes

    Non-magnetic protection pipes

    The non-magnetic protection pipes is a sleeve for petroleum transmission, including a positioning ring. Two groups are arranged symmetrically, and the positioning ring includes a half ring body, the half ring body is symmetrically arranged with two groups before and after, and the bottom of the half ring body is connected to the connecting shaft. The inner wall surface of the half ring body is fitted with a sealing ring, and the top of the half ring body is provided with two sets of sealing p...
123456 Next > >> Page 1 / 9