Factory making S Monel - Soft Magnetic Alloy 1J85 – Herui

Short Description:

Product Detail


Product Tags

Related Video

Feedback (2)

Bear "Customer first, High quality first" in mind, we perform closely with our consumers and provide them with efficient and experienced services for Inconel 800ht , Inconel Welding Wire , High Speed Steel Flat Stock , We sincerely welcome overseas consumers to consult for your long-term cooperation as well as the mutual advancement.We strongly think that we will do superior and far better.
Factory making S Monel - Soft Magnetic Alloy 1J85 – Herui Detail:


1J85 is a kind of Fe-Ni soft magnetic alloy with high weak magnetic field permeability. It has high permeability and low coercivity in weak magnetic field. Widely used in radio electronics industry, precision instruments and meters, remote control and automatic control systems.

Chemical Composition

C P S Cu Mn Si Mo Ni Fe
0.03 0.020 0.020 0.20 0.30-0.60 0.15-0.30 4.8-5.2 79.0-81.0 Bal.

Mechanical Properties

Density (g/cm3) Electrical Resistivity(μΩ•m) Curie Point Magnetic Properties (10-6 )
8.75 0.56 400 0.5

Form Available

bar, plate, strip

Product detail pictures:

Factory making S Monel - Soft Magnetic Alloy 1J85 – Herui detail pictures

Factory making S Monel - Soft Magnetic Alloy 1J85 – Herui detail pictures

Factory making S Monel - Soft Magnetic Alloy 1J85 – Herui detail pictures

Related Product Guide:

Our goods are commonly recognized and reliable by consumers and may satisfy continually developing economic and social needs for Factory making S Monel - Soft Magnetic Alloy 1J85 – Herui, The product will supply to all over the world, such as: Senegal, Argentina, Manchester, Due to good quality and reasonable prices, our items have been exported to more than 10 countries and regions. We are looking forward to cooperating with all customers from at home and abroad. Moreover, customer satisfaction is our eternal pursuit.
The use and maintain of the sawblade

◎ The carbide tip of sawblade is very sharp, so process of using must be prevent the carbide tip.

◎ PeriodicaI cleaning and support the machine,the spindle’s running tolerance must be less than h7.

◎ The flanges must be parallel to each other,must be of the same diameter 1/3 of the sawblade’s diameter(formuIti—rip saw blade is 1/2.

◎ When instaIIion the sawbIade,it shaII be 5-6 teeth higher than board surface.

◎ Before operation,check the firmly of the sawblade,be sure nobody in front of the machine. Do not feed of operation check whether the machine is good for operaiton. Periodical check the function of the machine,the certicaI jump is less than ±0.02MM,and the flap is less than ±0.01.

◎ After continuous use,must be removed and cleaning the sawblade,get rid of the resin and sawdust of the sawblade of both sides.Other wise it would beinfluence the effect of using the sawblade.

◎ Deposit of the sawblade,must not be layer the sawblade,it is putted in the originaI package inside.

The renovate of the sawbIade

◎ The renovate of the carbide sawblade While it no longer sharpen and the horizontaI piece coarseaess. The power of using sawblade machine obviously Increase. When process materiaI,the materiaI appearred burst. The carbide tip exhaust more than 0.02MM.

◎ For the renovate the sawblade,it shouId be grinding by the a formal company, so be sure the quality of the sawblade after renovating.

  • This supplier offers high quality but low price products, it is really a nice manufacturer and business partner.
    5 Stars By Erin from Vietnam - 2018.09.08 17:09
    The enterprise has a strong capital and competitive power, product is sufficient, reliable, so we have no worries on cooperating with them.
    5 Stars By Salome from Iceland - 2017.10.13 10:47