Good Quality Monel 400 Round Bar - Elgiloy alloy (Co40CrNiMo), AMS 5833, UNS R3003, 3J21 – Herui Detail:
Description
This Cobalt-Chromium-Nickel alloy is also known as Elgiloy, it has a combination of high strength, ductility and good mechanical properties and is age harden-able. The Phynox alloy also has excellent fatigue life, corrosion resistance in numerous environments and non-magnetic. This alloy is recommended where a high resistance to corrosion and low relaxation at temperatures up to 380℃ are required.
Chemical Composition (%)
| C | 0.07~0.12, |
| Mn | 1.7~2.3, |
| Si≤0.60 | |
| P≤ | 0.01 |
| S≤ 0.01 | |
| Ni | 14.0~21.0 |
| Cr | 19.0~21.0 |
| Co | 39.0~41.0 |
| Mo | 6.5~7.5 |
| Fe | Balance |
Application
Springs
Seal components
Medical devices
Components for watches
Aerospace applications
Petro-chemical applications
Marine engineering
Equal grades
UNS R30003，3J21，Phynox, W.Nr 2.4711
Forms available
Strip, wire, bar, rod
Product detail pictures:
Related Product Guide:
Trustworthy good quality and excellent credit score standing are our principles, which will help us at a top-ranking position. Adhering towards the tenet of "quality first, buyer supreme" for Good Quality Monel 400 Round Bar - Elgiloy alloy (Co40CrNiMo), AMS 5833, UNS R3003, 3J21 – Herui, The product will supply to all over the world, such as: Canberra, San Diego, Denmark, Besides strong technical strength, we also introduce advanced equipment for inspection and conduct strict management. All the staff of our company welcome friends both at home and abroad to come for visits and business on the basis of equality and mutual benefit. If you are interested in any of our items, please feel free to contact us for quotation and product details.
The use and maintain of the sawblade
◎ The carbide tip of sawblade is very sharp, so process of using must be prevent the carbide tip.
◎ PeriodicaI cleaning and support the machine,the spindle’s running tolerance must be less than h7.
◎ The flanges must be parallel to each other,must be of the same diameter 1/3 of the sawblade’s diameter(formuIti—rip saw blade is 1/2.
◎ When instaIIion the sawbIade,it shaII be 5-6 teeth higher than board surface．
◎ Before operation,check the firmly of the sawblade,be sure nobody in front of the machine. Do not feed of operation check whether the machine is good for operaiton. Periodical check the function of the machine,the certicaI jump is less than ±0.02MM,and the flap is less than ±0.01.
◎ After continuous use,must be removed and cleaning the sawblade,get rid of the resin and sawdust of the sawblade of both sides.Other wise it would beinfluence the effect of using the sawblade.
◎ Deposit of the sawblade,must not be layer the sawblade,it is putted in the originaI package inside.
The renovate of the sawbIade
◎ The renovate of the carbide sawblade While it no longer sharpen and the horizontaI piece coarseaess. The power of using sawblade machine obviously Increase. When process materiaI,the materiaI appearred burst. The carbide tip exhaust more than 0.02MM.
◎ For the renovate the sawblade,it shouId be grinding by the a formal company, so be sure the quality of the sawblade after renovating.
By Hulda from Canada - 2018.03.03 13:09
This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
By Victoria from Bangkok - 2017.11.20 15:58
