Massive Selection for Non Magnetic Stainless Steel Bolts - Super Invar 32-5 – Herui Detail:
Description
Super Invar 32-5(UNS K93500), a magnetic, austenitic, solid solution alloy containing iron, nickel, and cobalt, is designed to provide minimum thermal expansion at room temperatures. This alloy also exhibits austenite stability to service temperature at least -67°F and thermal expansion properties less than those of Invar 36 alloy (36% nickel-iron) when used in the -67/203℉(-55/95°C) temperature range.
Applications for Super Invar 32-5 have included structural components for supports and substrates in optical and laser systems requiring precision measurements. This alloy has also used in wave guide tubes and other systems requiring metals in conjunction with low expansion glass/quartz assemblies.
Chemical composition
|
Iron |
Bal |
|
Nominal Nickel |
32 |
|
Nominal Cobalt |
5.0 |
|
Carbon |
0.05 |
|
Silicon |
0.25 |
|
Sulfur |
0.015 |
|
Chromium |
0.25 |
Application
Optical instruments
Telescopes
Laser instruments and equipment
Ring laser gyroscopes
Laser benches
Positioning devices
Metrology devices
Scientific instruments
Structural components and supports for optical and laser systems
Applications that require lower expansivity than Invar
Equal grades
4J32(China)
Forms available
Strip, sheet, bar, wire, bar, forging, tube, capillary
Product detail pictures:
Related Product Guide:
Our staff through skilled training. Skilled skilled knowledge, potent sense of company, to satisfy the provider requirements of consumers for Massive Selection for Non Magnetic Stainless Steel Bolts - Super Invar 32-5 – Herui, The product will supply to all over the world, such as: Oman, Jeddah, Johannesburg, We have been fully aware of our customer's needs. We deliver high quality products, competitive prices and the first class service. We would like to establish good business relationships as well as friendship with you in the near future.
The use and maintain of the sawblade
◎ The carbide tip of sawblade is very sharp, so process of using must be prevent the carbide tip.
◎ PeriodicaI cleaning and support the machine,the spindle’s running tolerance must be less than h7.
◎ The flanges must be parallel to each other,must be of the same diameter 1/3 of the sawblade’s diameter(formuIti—rip saw blade is 1/2.
◎ When instaIIion the sawbIade,it shaII be 5-6 teeth higher than board surface．
◎ Before operation,check the firmly of the sawblade,be sure nobody in front of the machine. Do not feed of operation check whether the machine is good for operaiton. Periodical check the function of the machine,the certicaI jump is less than ±0.02MM,and the flap is less than ±0.01.
◎ After continuous use,must be removed and cleaning the sawblade,get rid of the resin and sawdust of the sawblade of both sides.Other wise it would beinfluence the effect of using the sawblade.
◎ Deposit of the sawblade,must not be layer the sawblade,it is putted in the originaI package inside.
The renovate of the sawbIade
◎ The renovate of the carbide sawblade While it no longer sharpen and the horizontaI piece coarseaess. The power of using sawblade machine obviously Increase. When process materiaI,the materiaI appearred burst. The carbide tip exhaust more than 0.02MM.
◎ For the renovate the sawblade,it shouId be grinding by the a formal company, so be sure the quality of the sawblade after renovating.
By Honey from Afghanistan - 2017.08.18 11:04
The supplier abide the theory of "quality the basic, trust the first and management the advanced" so that they can ensure a reliable product quality and stable customers.
By Queena from Monaco - 2017.12.31 14:53
