New Fashion Design for M2 Tool Steel Machinability - New product custom 18650 21700 26650 32650 pure nickel strip tape for battery – Herui Detail:
- Place of Origin:
-
Jiangsu, China
- Type:
-
Nickel Strip
- Application:
-
Vacuum Electronic Industry
- Grade:
-
nickel
- Ni (Min):
-
29%
- Resistance (μΩ.m):
-
49mm2/m
- Powder Or Not:
-
Not Powder
- Ultimate Strength (≥ MPa):
-
517
- Elongation (≥ %):
-
30
- Model Number:
-
Nickel Strip
- Brand Name:
-
HeRui
- Product name:
-
18650 21700 26650 32650 pure nickel strip for battery
- Standard:
-
ASTM F-15
- Surface:
-
Bright
- Size:
-
Customized
- MOQ:
-
100KGS
- Color:
-
Nickel Nature
Composition
|
N4
|
N6
|
Nickel201
|
Nickel200
|
Ni
|
–
|
–
|
≥99
|
≥99.2
|
Ni+Co
|
99.9
|
99.5
|
–
|
–
|
Cu
|
≤0.015
|
0.1
|
≤0.25
|
≤0.25
|
Si
|
≤0.03
|
0.1
|
≤0.35
|
≤0.35
|
Mn
|
≤0.002
|
0.05
|
≤0.35
|
≤0.35
|
C
|
≤0.01
|
0.1
|
≤0.02
|
≤0.15
|
Mg
|
≤0.01
|
0.1
|
–
|
–
|
S
|
≤0.001
|
0.005
|
≤0.01
|
≤0.01
|
P
|
≤0.001
|
0.002
|
–
|
–
|
Fe
|
≤0.04
|
0.1
|
≤0.4
|
≤0.4
|
Product detail pictures:
Related Product Guide:
Our commission is always to provide our customers and clientele with best quality and aggressive portable digital products for New Fashion Design for M2 Tool Steel Machinability - New product custom 18650 21700 26650 32650 pure nickel strip tape for battery – Herui, The product will supply to all over the world, such as: Cancun, Madrid, Madrid, If any product meed your demand, please feel free to contact us. We're sure your any inquiry or requirement will get prompt attention, high-quality products, preferential prices and cheap freight. Sincerely welcome friends all over the world to call or come to visit, to discuss cooperation for a better future!
The use and maintain of the sawblade
◎ The carbide tip of sawblade is very sharp, so process of using must be prevent the carbide tip.
◎ PeriodicaI cleaning and support the machine,the spindle’s running tolerance must be less than h7.
◎ The flanges must be parallel to each other,must be of the same diameter 1/3 of the sawblade’s diameter(formuIti—rip saw blade is 1/2.
◎ When instaIIion the sawbIade,it shaII be 5-6 teeth higher than board surface.
◎ Before operation,check the firmly of the sawblade,be sure nobody in front of the machine. Do not feed of operation check whether the machine is good for operaiton. Periodical check the function of the machine,the certicaI jump is less than ±0.02MM,and the flap is less than ±0.01.
◎ After continuous use,must be removed and cleaning the sawblade,get rid of the resin and sawdust of the sawblade of both sides.Other wise it would beinfluence the effect of using the sawblade.
◎ Deposit of the sawblade,must not be layer the sawblade,it is putted in the originaI package inside.
The renovate of the sawbIade
◎ The renovate of the carbide sawblade While it no longer sharpen and the horizontaI piece coarseaess. The power of using sawblade machine obviously Increase. When process materiaI,the materiaI appearred burst. The carbide tip exhaust more than 0.02MM.
◎ For the renovate the sawblade,it shouId be grinding by the a formal company, so be sure the quality of the sawblade after renovating.
By Amber from Puerto Rico - 2018.12.22 12:52
As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
By Edwina from Czech - 2017.10.13 10:47