Newly Arrival Non Magnetic Hardenable Stainless Steel - HeRui Factory Supply Good Quality Nickel Alloy Inconel 718 Kovar Invar 36 Bar Rods – Herui Detail:
- Place of Origin:
-
Jiangsu, China
- Type:
-
Nickel Bar
- Application:
-
Electromagnet pole head
- Grade:
-
FeCo50V2
- Ni (Min):
-
49% Co and 2% V
- Resistance (μΩ.m):
-
41mm2/m
- Powder Or Not:
-
Not Powder
- Ultimate Strength (≥ MPa):
-
1340
- Elongation (≥ %):
-
9
- Model Number:
-
fe cobalt vanadium alloy
- Brand Name:
-
HeRui
- Product name:
-
Nickel Alloy Inconel 718 Kovar Invar 36 Bar Rods
- Standard:
-
ASTM A801
- Surface:
-
Bright
- Delivery Time:
-
30 Days
- Shape:
-
Bar, Plate
- Size:
-
Customized
Forms of supply
|
||||
ROD
|
Dia.20 to180mm, Length2000mm,Max
|
Surface Finish: Black, De-scaling & Ground Surface
|
||
STRIP/SHEET
|
T0.1 to 3.0mm, width300mm,Max
|
Temper Name : Hard / Annealed
|
||
PLATE
|
T3.0 to 40.0mm, Width1000mm,Max
|
Surface Finish: Black / Bright
|
Chemical Composition,%
|
||||||||||||||||||
C Max
|
Mn Max
|
Si Max
|
P Max
|
S Max
|
Cr Max
|
Ni Max
|
Co
|
V
|
Fe
|
|||||||||
0.025
|
0.15
|
0.15
|
0.015
|
0.01
|
0.15
|
0.25
|
47.5-49.5
|
1.75-2.10
|
Bal.
|
DC Magnetic Properties
|
||||||||||
Forms
|
Magnetic induction at different magnetic field B,≥(T)
|
Coercivity Hc,≤(A/m)
|
||||||||
B800
|
B800
|
B800
|
B800
|
|||||||
Cold-Rolling Strip
|
2.00
|
2.00
|
2.00
|
2.00
|
128
|
|||||
Forgings ,Bar
|
1.50
|
1.50
|
1.50
|
1.50
|
144
|
Product detail pictures:
Related Product Guide:
We have now a skilled, performance group to offer excellent support for our consumer. We usually follow the tenet of customer-oriented, details-focused for Newly Arrival Non Magnetic Hardenable Stainless Steel - HeRui Factory Supply Good Quality Nickel Alloy Inconel 718 Kovar Invar 36 Bar Rods – Herui, The product will supply to all over the world, such as: Costa Rica, Sudan, Leicester, Our products are widely sold to Europe, USA, Russia, UK, France, Australia, Middle East, South America, Africa, and Southeast Asia, etc. Our solutions are highly recognized by our customers from all around the world. And our company is committed to continually improving effectiveness of our management system to maximize customer satisfaction. We sincerely hope to make progress with our customers and create a win-win future together. Welcome to join us for business!
The use and maintain of the sawblade
◎ The carbide tip of sawblade is very sharp, so process of using must be prevent the carbide tip.
◎ PeriodicaI cleaning and support the machine,the spindle’s running tolerance must be less than h7.
◎ The flanges must be parallel to each other,must be of the same diameter 1/3 of the sawblade’s diameter(formuIti—rip saw blade is 1/2.
◎ When instaIIion the sawbIade,it shaII be 5-6 teeth higher than board surface.
◎ Before operation,check the firmly of the sawblade,be sure nobody in front of the machine. Do not feed of operation check whether the machine is good for operaiton. Periodical check the function of the machine,the certicaI jump is less than ±0.02MM,and the flap is less than ±0.01.
◎ After continuous use,must be removed and cleaning the sawblade,get rid of the resin and sawdust of the sawblade of both sides.Other wise it would beinfluence the effect of using the sawblade.
◎ Deposit of the sawblade,must not be layer the sawblade,it is putted in the originaI package inside.
The renovate of the sawbIade
◎ The renovate of the carbide sawblade While it no longer sharpen and the horizontaI piece coarseaess. The power of using sawblade machine obviously Increase. When process materiaI,the materiaI appearred burst. The carbide tip exhaust more than 0.02MM.
◎ For the renovate the sawblade,it shouId be grinding by the a formal company, so be sure the quality of the sawblade after renovating.
By Diana from Moscow - 2018.12.28 15:18
The customer service staff's attitude is very sincere and the reply is timely and very detailed, this is very helpful for our deal,thank you.
By Dana from Ecuador - 2018.12.11 14:13