One of Hottest for M2 Round Steel - NIMONIC 90 – Herui

Short Description:

Product Detail


Product Tags

Related Video

Feedback (2)

We are going to dedicate ourselves to providing our esteemed buyers together with the most enthusiastically thoughtful products and services for M2 Tool Steel Supplier , Uns 4400 , K Monel Material , Never-ending improvement and striving for 0% deficiency are our two main excellent policies. Should you need anything, never be reluctant to speak to us.
One of Hottest for M2 Round Steel - NIMONIC 90 – Herui Detail:


NIMONIC 90 (UNS N07090/W. Nr. 2.4632) is a wrought nickel-chromium-cobalt base alloy strengthened by additions of titanium and aluminum. It has been developed as an age-harden-able creep-resisting alloy for service at temperatures up to 920°C (1688°F. The alloy is used for turbine blades, discs, forgings, ring sections and hot-working tools.

Typical chemical composition

Carbon  0.13 max.
Silicon  1.0 max.
Copper  0.2 max.
Iron  1.5 max.
Manganese  1.0 max.
Chromium  18.0-21.0
Titanium  2.0-3.0
Aluminum  1.0-2.0
Cobalt  15.0-21.0
Boron  0.02 max.
Sulfur  0.015 max.
Lead  0.0020 max.
Zirconium  0.15 max.
Nickel  Balance


The alloy is used for turbine blades, discs, forgings, ring sections and hot-working tools. Also used to make Aerospace fasteners.

Equal grades

GH4090(China), Nickel Alloy 90, UNS N07090, Werkstoff Nr. 2.4632, Werkstoff Br. 2.4969, NiCr20Co18Ti

Forms of product available

Plate, sheet, strip, bar, wire, rod, pipe, tube, forging.

Product detail pictures:

One of Hottest for M2 Round Steel - NIMONIC 90 – Herui detail pictures

Related Product Guide:

It is a great way to further improve our products and repair. Our mission is always to create innovative products to prospects with a superior expertise for One of Hottest for M2 Round Steel - NIMONIC 90 – Herui, The product will supply to all over the world, such as: Madagascar, Georgia, Nairobi, We hope to have long-term cooperation relationships with our clients. If you are interested in any of our products, please do not hesitate to send enquiry to us/company name. We ensure that you can be totally satisfied with our best solutions!
The use and maintain of the sawblade

◎ The carbide tip of sawblade is very sharp, so process of using must be prevent the carbide tip.

◎ PeriodicaI cleaning and support the machine,the spindle’s running tolerance must be less than h7.

◎ The flanges must be parallel to each other,must be of the same diameter 1/3 of the sawblade’s diameter(formuIti—rip saw blade is 1/2.

◎ When instaIIion the sawbIade,it shaII be 5-6 teeth higher than board surface.

◎ Before operation,check the firmly of the sawblade,be sure nobody in front of the machine. Do not feed of operation check whether the machine is good for operaiton. Periodical check the function of the machine,the certicaI jump is less than ±0.02MM,and the flap is less than ±0.01.

◎ After continuous use,must be removed and cleaning the sawblade,get rid of the resin and sawdust of the sawblade of both sides.Other wise it would beinfluence the effect of using the sawblade.

◎ Deposit of the sawblade,must not be layer the sawblade,it is putted in the originaI package inside.

The renovate of the sawbIade

◎ The renovate of the carbide sawblade While it no longer sharpen and the horizontaI piece coarseaess. The power of using sawblade machine obviously Increase. When process materiaI,the materiaI appearred burst. The carbide tip exhaust more than 0.02MM.

◎ For the renovate the sawblade,it shouId be grinding by the a formal company, so be sure the quality of the sawblade after renovating.

  • We are old friends, the company's product quality has been always very good and this time the price is also very cheap.
    5 Stars By Mamie from Austria - 2018.02.21 12:14
    This company conforms to the market requirement and joins in the market competition by its high quality product, this is an enterprise that have Chinese spirit.
    5 Stars By Eric from Belgium - 2018.12.14 15:26