Rapid Delivery for Uns N05500 - Hot-selling Non-magnetic Steel, High Quality Non-Magnetic Drill Collars – Herui
HOW TO USE THE SAWBLADE
Rapid Delivery for Uns N05500 - Hot-selling Non-magnetic Steel, High Quality Non-Magnetic Drill Collars – Herui Detail:
- Place of Origin:
- Brand Name:
- Model Number:
- Chemical Composition:
Mn: 16.00-19.00, Cr: 15.00-17.00
API Spec. 7.1
- Delivery time:
- Screw Type:
NC, REG, IF, FH
1. CHEMICAL COMPOSITION
“P530” is a special nonmagnetic, austenitic Mn-Cr-N steel with a Nickel-content of ≤2%.
C: 0,05max, Mn: 18.50-20.00, Cr: 13.00-14.00, Mo: 0.40-0.60, N: 0.25-0.40, Ni: 2.00max.
2. MECHANICAL PROPERTIES
Following mechanical properties (tested at room temperature) are achieved by a special cold-working process over the full length of the collar:
Yield Strength (min.): OD less than 4”830 N/mm²
0,2%-offset method: OD 4”to 9 1/4”/ 760 N/mm²
OD 9 1/2”and larger / 690 N/mm²
Tensile Strength: OD less than 4”/ 900 N/mm²
OD 4”and larger / 830 N/mm²
Elongation (min.): 25%
Reduction of area (min.): 50%
Impact energy (min.): 122 J
Hardness Brinell (min.): 285-350 HB
3. MAGNETIC PROPERTIES
Relative permeability: ≤1,001.
4. CORROSION RESISTANCE
- Transgranular SCC: Prevented by special surface treatments (Hammer peening, roller burnishing, shot peening).
- Intergranular SCC: The occurrence of material sensitization is prevented by quenching after warm-forging. Each collar is tested according to ASTM A 262, Pract. A and E, last edition
5. NON-DESTRUCTIVE TESTING
- Magnetic inspection: Drill collars are 100% tested by a proprietary probe-testing process using a Förster Magnetomat 1.782. (“Hot Spot”-test). Magnetic permeability of each collar is certified with the printout of probe-testing.
- Ultrasonic inspection: Each collar is ultrasonically inspected over 100% of the volume according to ASTM E 114, last edition as a minimum level.
6. GALLING RESISTANCE
“P530” is due to the chemical composition and the special cold-working process less susceptible to galling than Cr-Ni steels.
Non-Magnetic material optimized for MWD-collars and stabilizers (higher strength and endurance) is available on special request. P530-Non-Magnetic Drill Collars meet all requirements of API Spec. 7.1, last edition. All tests are carried out according to ASTM-Standards, last editions.
ZHENJIANG HERUI BUSINESS BRIDGE IMP&EXP Co., Ltd is a leading manufacturer and supplier of high speed steel, non-magnetic steel, nickel-based alloys, etc. we can supply in forms of wire, strip, sheet, rod, bar, tube and pipe at competitive prices to meet our customers’ requirements. Our Products can be widely used in petrochemical industry, aviation & aerospace, metallurgy, machinery, electronics, energy and so on. Our company possesses a fully integrated production process, it starts from vacuum melting to final packaging led by the quality control and R&D teams, ensures all products meet the standards strictly. We always can serve the reliable products with on-time delivery. “quality first, customer foremost “, Zhenjiang Herui Business Bridge IMP & EXP Co., Ltd welcomes you to visit our company sincerely and be dedicated to supplying you our quality products with the best service.
High speed steel
Mold / Die steel
Thermal spraying wire
Q: Are you trading company or manufacturer?
A: We are a manufacturer with our own import and export company.
Q: How long is your delivery time?
A: Generally speaking, 20 days according to the quantity.
Q: Do you provide samples?
A: Yes, we could provide the sample free of charge.
Q: What is your terms of payment?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance, the balance before shipment.
Q: How can I place order?
A: You can contact us by email, or place orders online.
Q: How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T, L/C, Western Union are the most usual ways we are using. If you want to use other way, please tell me, we can discuss it.
Q: What’s the order procedure?
A: First we discuss order details, production details by email or TM. Then we issue you an PI for your confirmation. You will be requested to do prepaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.
Q: How do you take care when your clients received defective products?
A: replacement. If there are some defective items, we usually credit to our customer or replace in next shipment.
Product detail pictures:
Related Product Guide:
Sticking to your belief of "Creating solutions of high quality and generating buddies with people from all around the world", we always put the fascination of customers to start with for Rapid Delivery for Uns N05500 - Hot-selling Non-magnetic Steel, High Quality Non-Magnetic Drill Collars – Herui, The product will supply to all over the world, such as: Munich, Canberra, Guyana, To meet the requirements of specific customers for each bit more perfect service and stable quality merchandise. We warmly welcome customers around the world to visit us, with our multi-faceted cooperation, and jointly develop new markets, create a brilliant future!
The use and maintain of the sawblade
◎ The carbide tip of sawblade is very sharp, so process of using must be prevent the carbide tip.
◎ PeriodicaI cleaning and support the machine,the spindle’s running tolerance must be less than h7.
◎ The flanges must be parallel to each other,must be of the same diameter 1/3 of the sawblade’s diameter(formuIti—rip saw blade is 1/2.
◎ When instaIIion the sawbIade,it shaII be 5-6 teeth higher than board surface．
◎ Before operation,check the firmly of the sawblade,be sure nobody in front of the machine. Do not feed of operation check whether the machine is good for operaiton. Periodical check the function of the machine,the certicaI jump is less than ±0.02MM,and the flap is less than ±0.01.
◎ After continuous use,must be removed and cleaning the sawblade,get rid of the resin and sawdust of the sawblade of both sides.Other wise it would beinfluence the effect of using the sawblade.
◎ Deposit of the sawblade,must not be layer the sawblade,it is putted in the originaI package inside.
The renovate of the sawbIade
◎ The renovate of the carbide sawblade While it no longer sharpen and the horizontaI piece coarseaess. The power of using sawblade machine obviously Increase. When process materiaI,the materiaI appearred burst. The carbide tip exhaust more than 0.02MM.
◎ For the renovate the sawblade,it shouId be grinding by the a formal company, so be sure the quality of the sawblade after renovating.
By June from Tunisia - 2017.03.07 13:42
As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
By Henry from Mauritius - 2017.09.30 16:36