-
i/ Precise rolling steel sheet
Thickness 0.6-1.0mm
width 500-1000mm
length 1500-3000mm
-
j/ Hot rolling small flat bar
thickness 1..6-40mm
width 16-200mm
length 2000-4000mm
-
k/ Hot rolling large flat bar
thickness 10-40mm
width 300-800mm
length 1500-3000mm
-
Corrosion-resistant Copper-nickel Alloy Monel K-500 Sheet
MONEL alloy K-500 (UNS N05500 / W. Nr. 2.4375) is a nickel-copper alloy which combines the excellent corrosion resistance of MONEL alloy 400 with the added advantages of greater strength and hardness. The increased properties are obtained by adding aluminum and titanium to the nickel-copper base, and by heating under controlled conditions so that submicroscopic particles of Ni3 (Ti, Al) are precipitated throughout the matrix. The thermal processing used to effect precipitation is commonly called age hardening or aging. Typical applications for MONEL K-500 products are chains and cables, fasteners and springs for marine service; pump and valve components for chemical processing; doctor blades and scrapers for pulp processing in paper production; oil well drill collars and instruments, pump shafts and impellers, non-magnetic housings, safety lifts and valves for oil and gas production; and sensors and other electronic components.
-
Heat and Corrosion Resistance UNS N07750 Inconel X-750 Spring Wire
Inconel X-750 (UNS N07750 / W. Nr. 2.4669 / GH4145 / NiCr15Fe7TiAl) is a precipitation-hardenable nickel-chromium alloy used for its corrosion and oxidation resistance and high strength at temperatures to 1300°F. Although much of the effect of precipitation hardening is lost with increasing temperature over 1300°F, heat-treated material has useful strength up to 1800°F. This kind of alloy also has excellent properties down to cryogenic temperatures.
-
Monel K-500
Description MONEL alloy K-500 (UNS N05500 / W. Nr. 2.4375) is a nickel-copper alloy which combines the excellent corrosion resistance of MONEL alloy 400 with the added advantages of greater strength and hardness. The increased properties are obtained by adding aluminum and titanium to the nickel-copper base, and by heating under controlled conditions so that submicroscopic particles of Ni3 (Ti, Al) are precipitated throughout the matrix. The thermal processing used to effect precipitation is ... -
Soft Magnetic Alloy 1J85
Description 1J85 is a kind of Fe-Ni soft magnetic alloy with high weak magnetic field permeability. It has high permeability and low coercivity in weak magnetic field. Widely used in radio electronics industry, precision instruments and meters, remote control and automatic control systems. Chemical Composition C P S Cu Mn Si Mo Ni Fe （≤） 0.03 0.020 0.020 0.20 0.30-0.60 0.15-0.30 4.8-5.2 79.0-81.0 Bal. Mechanical Properties Density (g/cm3) Electrical Resistivity(μΩ•m) Curie Poin... -
NIMONIC 80A
Description NIMONIC alloy 80A (UNS N07080/W. Nr. 2.4952 & 2.4631) is a wrought, age-hardenable nickel-chromium alloy, strengthened by additions of titanium, aluminum and carbon, developed for service at temperatures up to 815°C (1500°F). It is produced by high-frequency melting and casting in air for forms to be extruded. Electroslag refined material is used for forms to be forged. Vacuum refined versions are also available. NIMONIC alloy 80A is currently used for gas turbine components ... -
Alloy 50 (aka Magnifer 50, Carpenter High Permeability 49, Alloy 47-50)
Description A soft magnetic alloy, consisting of 49% Nickel, balance Iron used where high initial permeability, maximum permeability, and low core loss is needed. Chemical Composition C P S Cu Mn Si Ni Fe ≤ 0.03 0.020 0.020 0.20 0.30-0.60 0.15-0.30 49.0-50.5 Balance Characters High permeability High magnetic flux density Good fabrication property Anti-rust ability Applications Small power transformers, micro motors, relays, choke ring and an electromagnetic clutch of core, and magn... -
Inconel C-276 / Hastelloy C-276
Description INCONEL C-276 (UNS N10276 / W. Nr. 2.4819, NS334) is known for its corrosion resistance in a wide range of aggressive media. The high molybdenum content imparts resistance to localized corrosion such as pitting. The low carbon minimizes carbide precipitation during welding to maintain resistance to intergranular attack in heat-affected zones of welded joints. It is used in chemical processing, pollution control, pulp and paper production, industrial and municipal waste treatment a... -
Elgiloy alloy (Co40CrNiMo), AMS 5833, UNS R3003, 3J21
Description This Cobalt-Chromium-Nickel alloy is also known as Elgiloy, it has a combination of high strength, ductility and good mechanical properties and is age harden-able. The Phynox alloy also has excellent fatigue life, corrosion resistance in numerous environments and non-magnetic. This alloy is recommended where a high resistance to corrosion and low relaxation at temperatures up to 380℃ are required. Chemical Composition (%) C 0.07~0.12, Mn 1.7~2.3, Si≤0.60 P≤ 0.01 S≤... -
Pure Nickel
Description Commercially pure or low-alloy nickel has characteristics that are useful in several fields, notably chemical processing and electronics. Pure Nickel is highly resistant to various reducing chemicals and is unexcelled in resistance to caustic alkalis. Compared with nickel alloys, commercially pure nickel has high electrical and thermal conductivity. It also has a high Curie temperature and good magnetostrictive properties. Annealed nickel has a low hardness and good ductility and ...
